







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Henderson Homeowners Choose KraftMaid Construction
Mason Remodeling Co Henderson provides independent KraftMaid construction service in Henderson, NV – cabinet installation, refacing, repair, and full kitchen remodeling – for homeowners who already own KraftMaid cabinetry or are choosing it for a remodel. We are an independent service provider, not affiliated with or authorized by KraftMaid, and we don’t sell through the dealer network. That independence is the point: we tell you what’s worth repairing, what’s worth replacing, and what the job will actually cost in writing before any work starts.
KraftMaid is one of the most common cabinet lines in Henderson’s 1990s and 2000s master-planned housing – Green Valley, Anthem, Seven Hills – and our technicians have up to 22 years of experience working on it. Call (888) 325-9386 for a free estimate.
Why Trust Mason Remodeling Co Henderson for Your KraftMaid Construction?

Our technicians know the KraftMaid line from the inside: Vantage’s all-plywood box construction, Momentum’s framed full-overlay doors, the frameless full-access boxes, and the entry-level Prelude line. That familiarity matters because KraftMaid cabinets fail in predictable ways, and matching the right fix to the right failure is most of the job.
We source OEM-compatible replacement parts where the door style is still in production, and we’re straightforward about the cases where a quality aftermarket part outlasts the original. Everything we do is warranty-safe: we don’t drill into finished face frames, we don’t substitute hardware that changes the load rating, and we don’t make modifications that would give KraftMaid grounds to deny a finish or structural claim.
Every job comes with a written price before work begins and our 365-Day Done Right Promise – if the work isn’t right within a year of completion, we make it right at no cost. Every crew member is background-checked and identity-verified under The Threshold Standard, and you’ll get their name and photo before the visit. We serve KraftMaid owners across Henderson, from established Green Valley kitchens to newer builds pushing into Cadence and West Henderson.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Henderson
- Soft-close undermount glides losing their damping action. The Blum-style undermount slides KraftMaid uses are good hardware, but desert dust and years of heat cycling wear the dampers and springs inside the glide. The symptom is a drawer that slams, drifts open, or won’t stay closed. Usually the drawer box is fine and only the glide has failed – a repair, not a replacement.
- Painted and glazed MDF doors checking, blistering, or peeling at panel edges. This is the big one on Vantage and Momentum kitchens. Henderson’s low humidity pulls moisture out of the MDF substrate, and the paint or glaze film cracks and lifts where the door profile is thinnest. It shows up first along the raised-panel edges and around the center panel, not in the middle of flat stock.
- Face frames racking and door reveals going uneven. When a cabinet run was never properly shimmed and anchored to the wall, the framed boxes twist over time, and the gaps around doors drift from even to visibly off. Fixing it means re-leveling and re-anchoring the run, not adjusting the hinges.
- Box bottoms sagging under heavy cookware. Particleboard and thin plywood bottoms bow when shelf pins and corner braces were never upgraded, especially in deep pot-and-pan drawers loaded with cast iron. A reinforcement kit or a new bottom panel solves it without touching the doors.
- Hinges pulling out of the box in humid-then-dry cycles. Monsoon season followed by furnace-dry winter works the hinge screws loose, and the door starts to sag or rub. Often the fix is a hinge replacement with a better anchor, not a new door.
KraftMaid Parts & Our Repair-vs-Replace Approach

For KraftMaid doors, drawer fronts, and hinges, we use OEM parts where the door style is still in production – that’s the only way to match the profile and finish exactly. For hardware and glides, quality aftermarket undermount slides from Blum and Hettich often outlast the originals in Henderson’s climate, and we’ll tell you when that’s the smarter buy. We source parts per job; we don’t claim local stock.
Our repair-versus-replace call is honest. If boxes are solid and only the doors and finish are failing, refacing or door replacement almost always beats a full tear-out. We recommend replacement only when box joints have separated or water damage has reached the substrate. A common KraftMaid call is a Vantage or Momentum kitchen where the soft-close drawers no longer self-close and doors have started peeling along the painted edges after years of dry desert air. A qualified installer pulls the drawer boxes, checks whether the box or just the glide has failed, swaps in correctly rated undermount slides, and replaces or refinishes the affected doors – re-shimming the cabinet run if the reveals have drifted. Call (888) 325-9386 for a free estimate on your KraftMaid project.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open drawers and doors, check box construction, measure reveals, and identify which components have actually failed versus which are just cosmetically worn. You get a written assessment, not a sales pitch.
- 2
Written price before work. Every job gets a line-item written price before a single tool is unpacked. No verbal estimates that grow on the final bill.
- 3
Repair or install. OEM or quality aftermarket parts go in, boxes are re-shimmed and anchored, and installation follows the manufacturer’s clearances and load ratings so the cabinet warranty stays intact.
- 4
Test and walk-through. Every door and drawer is cycled, glides checked, and the homeowner walks the finished work with the technician.
- 5
365-Day Done Right Promise. If anything we did fails within a year of completion, we come back and fix it free – no conditions, no dispute process.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Henderson
We work across the KraftMaid line: Vantage and its all-plywood boxes, Momentum’s framed full-overlay construction, the frameless full-access boxes, and the entry-level Prelude series. We handle door and drawer front replacement, hinge and glide swaps, refacing, reconfiguration for kitchen layout changes, kitchen island installation, and full kitchen remodeling with countertops. Henderson kitchens often pair KraftMaid cabinets with Cambria or Silestone surfaces, and we coordinate the whole scope so the cabinet work and the countertop install fit together. We don’t stock parts locally – everything is sourced for your specific job and door style.
We Also Service These Brands
Mason Remodeling Co Henderson isn’t a single-brand shop. Alongside KraftMaid, we service and install Kohler fixtures, Cambria and Silestone surfaces, and Toto plumbing in Henderson kitchens and baths. If your project mixes KraftMaid cabinets with another brand’s countertop or sink, we handle the interfaces so nothing gets installed out of square and everything fits the way it should.
FAQs – KraftMaid Construction Service in Henderson

Is Mason Remodeling Co Henderson authorized by KraftMaid? No. We are an independent KraftMaid service provider in Henderson and are not affiliated with or authorized by KraftMaid. That independence means honest advice on repair versus replace with no pressure to buy through the dealer network. Call (888) 325-9386 for a free estimate.
Do you use genuine KraftMaid/OEM parts? Yes, for doors, drawer fronts, and hinges we use OEM KraftMaid parts wherever the door style is still in production. For glides we may recommend quality aftermarket undermount slides from Blum or Hettich when they’ll outlast the originals. Parts are sourced per job for your specific kitchen.
How long does KraftMaid service take? Glide and hinge repairs are usually a single visit. Door replacement, refacing, and reconfiguration run longer depending on the number of doors and finish matching. Your written price includes the expected timeline before work starts.
What KraftMaid models/series do you cover? Vantage, Momentum, the frameless full-access boxes, and the Prelude line. That covers most KraftMaid kitchens in Henderson’s 1990s and 2000s tract housing and newer master-planned builds.
Will service void my KraftMaid warranty? Our work is warranty-safe. We avoid modifications to finished face frames, keep hardware to the correct load rating, and don’t make changes that would give KraftMaid grounds to deny a finish or structural claim. Call (888) 325-9386 to talk through your warranty situation.
How much does KraftMaid construction cost in Henderson? Most KraftMaid projects in Henderson fall in these ranges:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Call (888) 325-9386 for an exact quote – estimates are free.
Can you match replacement doors for an older KraftMaid kitchen? Often yes. We check whether your door style and finish are still in production and match OEM fronts where possible, or reface to a consistent new finish when the original is discontinued. Call (888) 325-9386 for a free assessment.
Do KraftMaid cabinets hold up in Henderson’s dry heat? Boxes and frames hold up well; the painted and glazed MDF doors are what suffer most in Henderson’s low humidity, checking and peeling at panel edges over time. Regular inspection and prompt repair of failing edges extends cabinet life significantly.
Is it worth refacing vs. replacing KraftMaid cabinets? Refacing wins when boxes and joints are solid but doors and finish are failing – it usually costs less than a full tear-out and keeps your layout. Replacement makes sense when box joints have separated or water damage has reached the substrate. Call (888) 325-9386 for an honest recommendation.
Why do my KraftMaid soft-close drawers stop closing? Desert dust and heat cycling wear the dampers and springs in the undermount glides, so the drawer slams or won’t stay closed. The box is usually fine – the glide needs replacing. Call (888) 325-9386 to schedule a repair.
Can KraftMaid cabinets be reconfigured for a new kitchen layout? Yes. Framed and frameless KraftMaid boxes can often be relocated, added to, or swapped for new cabinets within an existing run. We check clearances, re-shim the run, and match the doors so the reconfigured kitchen reads as one installation.
Book Your KraftMaid Service in Henderson, NV
If your KraftMaid cabinets need repair, refacing, or a full kitchen remodel, we’ll give you a written price before any work starts and back it with our 365-Day Done Right Promise. Every technician is background-checked under The Threshold Standard and arrives in a marked uniform with a photo ID badge. Call Mason Remodeling Co Henderson at (888) 325-9386 for a free estimate.
Written by the team at Mason Remodeling Co Henderson.












