A Mason company - serving Henderson, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Delta · Henderson

Delta Construction Service in Henderson, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Henderson
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Henderson Homeowners Choose Delta Construction

Mason Remodeling Co Henderson provides independent Delta construction service in Henderson, and two things set our Delta work apart: we specify genuine Delta OEM cartridges and trim on anything warranty-sensitive, and we put a written price in front of you before a single tool comes out of the van. We’re not authorized, sponsored, or endorsed by Delta. We’re a local outfit that handles the Delta Monitor, Trinsic, Addison, Windemere, and Foundations lines often enough to know exactly how they fail in Henderson’s water and what actually fixes them.

Call (888) 325-9386

Between the hard water, the summer UV, and the tract housing that makes up most of this city, Delta fixtures here live a harder life than the manufacturer’s spec sheet assumes. That’s the whole reason a Delta page for Henderson should exist. Call (888) 325-9386 and a live person answers, any hour.

Why Trust Mason Remodeling Co Henderson for Your Delta Construction?

A tile setter installing wall tile in a shower

Delta makes a well-engineered product. The trouble is almost never the design – it’s what Henderson water does to a cartridge over six or eight years.

Our technicians have up to 22 years of experience, and a good share of that has been spent with the trim plate off, looking at what came out of a Monitor 13/14 valve body. We know which cartridges seize, why the balance spool sticks, and when a $30 seat-and-spring set solves a drip versus when you’re looking at a genuine rough-in problem. That judgment is the product. Not a brand sticker on the van.

On parts, we use genuine Delta OEM cartridges, seats, springs, and trim kits on any valve replacement or warranty-sensitive repair. Quality aftermarket seals and aerators are fine for plain wear items, and we’ll tell you which is which before we quote. We pull the exact part for your model and series – not a universal kit that “should” fit.

Every project gets a written price before work starts, backed by our written guarantee and the 365-Day Done Right Promise. If a repair or installation fails inside that year, we come back free. No dispute process, no argument about whose fault it was. That’s the standard every Mason Remodeling location holds to as part of the Threshold Group family.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Delta Construction Problems We Fix in Henderson

  • Monitor 13/14 Series pressure-balance cartridges seizing or sticking. This is the big one in Henderson. Years of mineral-heavy water scale up the cartridge and the balance spool, so your shower swings hot and cold or never gets truly hot. It’s usually diagnosed as “the valve is shot” by someone who doesn’t want to pull a cartridge. It’s almost always the cartridge.
  • Rubber seats and springs wearing out in single-handle and two-handle kitchen faucets. The Classic line is famous for it. A drip at the spout or a weep at the base is worn seats and springs nine times out of ten – a cheap, quick fix that gets misquoted as a full faucet replacement.
  • Ceramic disc valves in Trinsic and Addison kitchen faucets scoring up. Mineral deposits score the ceramic discs, so the handle gets stiff or the pull-down sprayer starts to diverge. The faucet isn’t dead. The cartridge assembly needs to come out and be replaced with the correct OEM part.
  • Finish pitting and aerator clogging on older Windemere and Foundations trim. High-mineral water pits the finish and clogs the aerator screen, which owners read as a failed valve. Sometimes it is just the aerator. We check before we quote a valve.
  • Corroded valve bodies behind old trim. The one case where repair isn’t the answer. If the rough-in is corroded through or the trim collection is obsolete, replacing the whole valve is the honest call – and we’ll tell you why in writing.

Here’s why this matters so much in Henderson specifically: the city was built out almost entirely after 1950, most of it during the 1990s and 2000s boom. That means you’re working in production-grade stucco-on-frame tract homes, not the mid-century stock you’d find over in Boulder City or older Las Vegas. The plumbing is modern enough that the original Delta valves are still in the walls – and still the same valves that have been drinking Henderson water for twenty-plus years. They’re due. In Green Valley, Anthem, and Seven Hills, the original Monitor 13/14 valves installed during the build are now at the exact age where cartridges fail en masse.

Delta Parts & Our Repair-vs-Replace Approach

A whole-home remodel with the living, dining and kitchen areas opened up

Parts get sourced per job, per model. We don’t claim to stock Delta parts locally – we pull the right OEM cartridge, seats, springs, or trim kit for your exact valve, and if it takes a day to get the part, it takes a day. No universal kits, no “close enough.”

The repair-vs-replace call is where we earn our keep, and we make it honestly:

  • If the valve body is sound, repairing a Delta cartridge is almost always the right call. A cartridge-and-seats job runs a fraction of a full valve replacement.
  • Replacing the whole shower valve is only justified when the rough-in is corroded or the trim is obsolete and no longer serviceable.
  • If you’re already planning a remodel and the wall is coming open anyway, that changes the math – we’ll walk you through it.

Call (888) 325-9386 and we’ll give you an honest read on which side of that line your Delta fixture is on. The estimate is free.

Our Delta Service Process – Step by Step

  1. 1
    Diagnosis. We identify the exact Delta model and series – Monitor 13/14, Trinsic, Addison, Windemere, Foundations, Classic – because the fix depends on it. Then we test the actual symptom: temperature swing, drip, stiff handle, sprayer divergence.
  2. 2
    Written price. You get the repair scope and the number in writing before any work starts. Every project, every time.
  3. 3
    Repair or install, warranty-safe. Genuine Delta OEM cartridges, seats, springs, and trim on valve work and warranty-sensitive repairs. We flush the valve body, set the correct rough-in depth, and don’t touch the manufacturer’s coverage in a way that voids it.
  4. 4
    Test and verify. We run hot/cold through the full range, check for drips at the spout, base, and trim, and confirm the balance function under a pressure change – like a toilet flushing mid-shower.
  5. 5
    Guarantee. Every completed project is covered by a written guarantee with stated terms – what’s covered, what’s excluded, for 365 days from the completion date. If a repair or installation fails inside that window, we come back free.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Delta Products We Service & Install in Henderson

A wide opening with a new beam where the kitchen wall was removed

We handle the Delta lines that show up in Henderson homes most: Monitor 13 and 14 Series tub and shower valves, including cartridge, balance spool, and trim replacement. Classic single-handle kitchen and lavatory faucets, including seats, springs, and aerator service. The Windemere and Foundations bath fixture collections, including finish and trim work. And the Trinsic and Addison kitchen faucet lines, including ceramic disc cartridge replacement and pull-down sprayer service.

That coverage lines up with the work these homes actually need – walk-in showers and shower remodeling, tub-to-shower conversions, and vanity installations across Green Valley, Anthem, Seven Hills, Cadence, Lake Las Vegas, and West Henderson. A shower that suddenly runs lukewarm or scalds when a toilet flushes usually traces back to a Monitor 13/14 Series pressure-balance cartridge that’s scaled up or lost its balance spool. A qualified local pro pulls the trim, extracts the cartridge, flushes the valve body, and installs a genuine Delta replacement cartridge and seats – no wall opening needed. If that same valve feeds a planned tub-to-shower conversion, the pro checks the rough-in depth and replaces the trim with a modern Delta collection while the wall is open, avoiding a second demolition later. That’s a real cost saving in Henderson, where hillside lots in Anthem and Seven Hills mean walls aren’t always cheap to open twice.

We Also Service These Brands

We work across the brands that fill Henderson bathrooms and kitchens, not just Delta – KraftMaid cabinetry, Kohler fixtures, Cambria quartz surfaces, and Toto toilets, alongside Delta’s own kitchen and bath lines. You don’t have to chase a single-brand specialist for each part of a remodel. One call covers the whole job, with a written price for all of it. Call (888) 325-9386.

Typical Delta Job, and What It Usually Costs

Most Delta service calls in Henderson follow the same shape: a cartridge fails, the owner assumes the valve is dead, and the fix is smaller than feared. Where a remodel is already planned, the numbers below are the ranges we quote most often.

Service Typical Henderson Cost Range
Walk-In Shower Installation $4,500 – $12,000
Tub-to-Shower Conversion $3,500 – $10,000
Bathroom Vanity Installation $800 – $3,000
Bathroom Remodel $9,000 – $28,000
Kitchen Remodel $14,000 – $45,000

FAQs – Delta Construction Service in Henderson

Book Your Delta Service in Henderson, NV

Whether it’s a Monitor 13/14 cartridge that won’t hold temperature, a Trinsic faucet with a stiff handle, or a full tub-to-shower conversion where the existing Delta valve needs a decision, we’ll give you a written price before anything starts and back the work for 365 days. Call (888) 325-9386 for a free estimate. A live person answers, any hour, any day.

Written by the team at Mason Remodeling Co Henderson.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porchA remodeled living room with built-in shelves around the fireplaceA single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Henderson

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Henderson team

A local vetted partner works across Henderson and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 325-9386
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Mason Remodeling Co Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch