







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Henderson, NV
A tub-to-shower conversion in Henderson typically costs $3,800 to $9,500 and takes three to seven working days once materials are on site. It means removing a tub you no longer use and rebuilding that footprint as a walk-in shower, with new waterproofing behind the tile, a properly sloped pan, and a drain centered where it belongs. Most of our Henderson conversions happen in older houses where the original tub has become a hazard or a waste of space, and in newer builds where the owner wants a shower that fits how they actually live.
We do this work as part of our Bathroom Remodeling service, and we do it with a written price in hand before anything gets demoed. Call (888) 325-9386 and a live person answers, day or night, and we can get an estimator to your door with a real number, not a ballpark.

Key Takeaways
- Most Henderson conversions land between $3,800 and $9,500 depending on pan type, tile, fixtures, and whether plumbing has to move.
- Every Mason Remodeling Co Henderson project starts with a written price, and every job carries our 365-Day Done Right Promise.
- Waterproofing is the part nobody sees and the part that decides whether a shower lasts. We build the pan and membrane to code, then tile over it.
- Background-checked, identity-verified technicians arrive in uniform with a photo ID badge, and you get their name and photo before they knock.
When You Need a Tub-to-Shower Conversion
- Stepping over the tub wall has gotten risky. We hear this most from Henderson homeowners in Sun City Anthem and the older pockets of Green Valley, where the original builder tub sits in a five-foot alcove and the apron wall is 16 inches of leg lift. A curbless shower with a bench removes that climb entirely.
- A tub sits in a bathroom nobody uses. Two bathrooms, one shower in daily use, one tub that’s been dry for a decade. That dead space becomes a usable shower and a real quality-of-life upgrade.
- The tub or surround has failed. Peeling acrylic, rust at the drain ring, soft spots around the overflow. In Henderson, we regularly see this in 1990s and early-2000s construction where the original tub surround was caulked once and never touched again.
- You’re planning for aging in place. Grab bars, a low or no curb, a fold-down bench, and a handheld slider on a bar. These are the features that keep a bathroom workable for decades.
- You want to make a small bathroom feel bigger. A shower footprint lets you open up the floor plate, add a glass panel instead of a curtain, and gain back wall space that the tub deck was stealing.
- Your tile is dated and the tub is on the way out anyway. If you’re already re-tiling the alcove, converting instead of re-setting the same tub is usually $1,200 to $2,400 more in material and labor and gets you a bathroom that matches the rest of the house.
If any of those sound like your bathroom, it’s worth having a conversation now rather than after a leak shows up on the ceiling below. Call (888) 325-9386 for a free estimate.

Our Tub-to-Shower Conversion Process
- In-home walkthrough and written price. We measure the alcove, check the drain location, look at the water supply and valve, and take photos of anything under the floor. Within a day or so you get a written price with line items, material allowances, and a stated completion date. No verbal estimates that grow on the final bill.
- Demo and inspection of what’s hiding. The tub comes out, then the old surround and backer. This is where we find the surprises: rotten framing around the valve, a floor joist notched for a drain line, an older galvanized stub. We confirm any change in conditions with you in writing before we move forward, so nothing shows up unannounced on an invoice.
- Rough plumbing and drain relocation. If the shower valve moves or the drain center needs to shift, we do that now, and we pull the Henderson permits that apply before we start. Building inspection happens at this stage, not secretly at the end.
- Pan, waterproofing, and backer. This is the part that matters most and the part most homeowners never see. We set a sloped shower pan, install a bonded waterproofing membrane up the walls and over the curb, and seal every seam, corner, and penetration. A Schluter-style shower profile is one option we use at the tile edge, the metal trim that seals the transition where tile meets drywall or flooring. Waterproofing is not a place to save money.
- Tile, glass, and fixtures. Floor tile at a minimum 2-inch slip-resistant size, wall tile set level and grouted with a sealed grout, then a frameless or semi-frameless glass panel. We hang a strong preference for real hardware from fixtures we specify together: Moen, Kohler, and Grohe valves and heads, with grab bars added where they belong. For showers that tie into a larger exterior project down the line (a patio, a privacy wall), some of our clients coordinate hardscaping from Belgard or Techo-Bloc while the crew is already on site.
- Final walk and sign-off. We run the shower for 20 minutes with a moisture meter on the walls and floor, check every drain slope, test the valve at both temperature stops, and walk the finished room with you before anything gets packed up. You get the written guarantee with terms spelled out: what’s covered, what’s excluded, and how long it runs.
Every crew member is background-checked, identity-verified, and introduced to you by name and photo before they arrive, then again by badge at the door under The Threshold Standard. Our technicians have up to 22 years of experience across tub conversions, tile, and plumbing. If something isn’t right within 365 days of completion, we come back and fix it at no cost, and if a repair or installation fails, we schedule a free second visit with no dispute process.
Tub-to-Shower Conversion Pricing in Henderson
Here are the ranges we actually quote in Henderson. They assume a standard five-foot alcove in good structural shape, and they include demo, waterproofing, tile, glass, and labor.
| Scope | Typical Price Range | What’s Included |
|---|---|---|
| Basic conversion, prefab pan and panels | $3,800 – $5,600 | Demo, acrylic or fiberglass pan and surround, standard valve replacement, glass doors |
| Mid-range tiled shower, curb and bench | $5,500 – $7,800 | Custom pan, bonded membrane, tile floor and walls, tile bench, frameless or semi-frameless glass |
| Premium curbless, large-format tile, linear drain | $7,800 – $9,500 | Curbless entry, linear drain, large-format tile, bench, Grohe or Kohler fixtures, grab bars |
| Added plumbing relocation (valve or drain move) | $650 – $1,800 | Move water valve, add or relocate drain, permit-related inspection |
| Structural repair or rot remediation | $400 – $2,500 | Replace subflooring or framing around a failed tub surround (quoted by scope after demo) |
What drives the price up on a specific Henderson job: whether the drain has to move (a lot of alcove drains sit about 8 inches from the back wall, and curbs and benches shift them), the tile you pick (imported porcelain and natural stone cost more material and more install time than standard porcelain), glass style (frameless needs precise measurements and a custom template), and any framing or rot we find after demo. What drives the price down: keeping the existing valve, choosing standard porcelain, and using a semi-frameless glass panel instead of a full custom frameless enclosure. Our estimator gives you a free written price, no obligation, no verbal estimates.
If you’re comparing this to a full bath remodel that also touches the vanity, lighting, and flooring, our home page and the bathroom remodeling service cover the broader scope. Call (888) 325-9386 for a free estimate on your Henderson conversion.
Where We Work in Henderson
Our estimators know the housing stock here well enough to tell you what a tub conversion looks like in your neighborhood before we arrive. In Green Valley and Anthem, most conversions are in 1990s and 2000s tract homes where the master tub alcove is a true five feet and the drain sits at a standard 8-inch set. Those jobs run smooth and predictable. In Sun City Anthem, where a lot of our work happens, we’re often converting tubs with safety in mind: curbless pans, low walls, grab bars, and a bench sized for easier sitting and standing. Along the older parts of Water Street and downtown Henderson, we run into heavier renovation – cast iron tubs that take a full day to remove and plumbing that’s original to the house, so we build a bit more time into the schedule and inspect before we commit.
One local note that surprises people: Henderson’s very dry, hot summer air puts real stress on silicone and grout at the seams around shower glass and the wall-to-floor joint. We use a flexible sealed grout at those transitions specifically because it moves with the house rather than cracking. It’s a small detail, but it’s the difference between a shower that looks right in year five and one that doesn’t.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Henderson?
A tub-to-shower conversion in Henderson runs between $3,800 and $9,500 for most standard alcoves, with premium curbless and large-format tile work at the top of that range and basic prefab conversions at the bottom. Call (888) 325-9386 for an exact quote – estimates are free.
Can you do a tub-to-shower conversion in one day?
No, and any company that says a tiled conversion happens in one day is skipping waterproofing steps or relying on a prefab drop-in unit. A quality tiled conversion takes three to seven working days, with inspection on the plumbing stage adding a day. Same-day prefab panel systems are faster but don’t hold up the same way over 15 years. Call (888) 325-9386 and we’ll tell you honestly which fits your home.
Is it cheaper to repair my tub or convert to a shower?
A cosmetic tub repair (replacing the drain, re-caulking, or reglazing) usually runs $300 to $900 and is worth it if the tub is structurally sound and you actually use it. A conversion is $3,800 and up, but it addresses the underlying issues a repair can’t fix: a failed pan, hidden rot, plumbing at end of life, and the mobility concerns that made you consider a shower in the first place. If you’re on the fence, call (888) 325-9386 and we’ll inspect your tub honestly.
Do I need a permit for a tub-to-shower conversion in Henderson?
Yes, in most cases. Henderson requires a plumbing permit when you change or relocate the drain, replace the valve, or alter the waterproofing and tile substrate. A panel swap over the existing tub drain might not trigger one, but a true conversion typically does. We pull the permits that apply and handle the inspection scheduling for you. Call (888) 325-9386 and we’ll walk through what your specific alcove needs.
Getting Started
If your Henderson bathroom has a tub that’s stopped earning its keep, converting to a shower adds usable space, a safer step, and a finish that fits the rest of the house. We’ll send an estimator with a written price, show you tile and fixture options in the budget you give us, and put the price in writing before any work starts. Our 365-Day Done Right Promise covers the finished shower for a full year, and we answer the phone 24 hours a day, every day, including weekends and holidays. Call (888) 325-9386 for a free estimate on your tub-to-shower conversion in Henderson.
Written by the team at Mason Remodeling Co Henderson, serving Henderson.


